initial commit

.gitattributes

@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain

.gitignore

@@ -0,0 +1,340 @@
+## Ignore Visual Studio temporary files, build results, and
+## files generated by popular Visual Studio add-ons.
+##
+## Get latest from https://github.com/github/gitignore/blob/master/VisualStudio.gitignore
+
+# User-specific files
+*.rsuser
+*.suo
+*.user
+*.userosscache
+*.sln.docstates
+
+# User-specific files (MonoDevelop/Xamarin Studio)
+*.userprefs
+
+# Build results
+[Dd]ebug/
+[Dd]ebugPublic/
+[Rr]elease/
+[Rr]eleases/
+x64/
+x86/
+[Aa][Rr][Mm]/
+[Aa][Rr][Mm]64/
+bld/
+[Bb]in/
+[Oo]bj/
+[Ll]og/
+
+# Visual Studio 2015/2017 cache/options directory
+.vs/
+# Uncomment if you have tasks that create the project's static files in wwwroot
+#wwwroot/
+
+# Visual Studio 2017 auto generated files
+Generated\ Files/
+
+# MSTest test Results
+[Tt]est[Rr]esult*/
+[Bb]uild[Ll]og.*
+
+# NUNIT
+*.VisualState.xml
+TestResult.xml
+
+# Build Results of an ATL Project
+[Dd]ebugPS/
+[Rr]eleasePS/
+dlldata.c
+
+# Benchmark Results
+BenchmarkDotNet.Artifacts/
+
+# .NET Core
+project.lock.json
+project.fragment.lock.json
+artifacts/
+
+# StyleCop
+StyleCopReport.xml
+
+# Files built by Visual Studio
+*_i.c
+*_p.c
+*_h.h
+*.ilk
+*.meta
+*.obj
+*.iobj
+*.pch
+*.pdb
+*.ipdb
+*.pgc
+*.pgd
+*.rsp
+*.sbr
+*.tlb
+*.tli
+*.tlh
+*.tmp
+*.tmp_proj
+*_wpftmp.csproj
+*.log
+*.vspscc
+*.vssscc
+.builds
+*.pidb
+*.svclog
+*.scc
+
+# Chutzpah Test files
+_Chutzpah*
+
+# Visual C++ cache files
+ipch/
+*.aps
+*.ncb
+*.opendb
+*.opensdf
+*.sdf
+*.cachefile
+*.VC.db
+*.VC.VC.opendb
+
+# Visual Studio profiler
+*.psess
+*.vsp
+*.vspx
+*.sap
+
+# Visual Studio Trace Files
+*.e2e
+
+# TFS 2012 Local Workspace
+$tf/
+
+# Guidance Automation Toolkit
+*.gpState
+
+# ReSharper is a .NET coding add-in
+_ReSharper*/
+*.[Rr]e[Ss]harper
+*.DotSettings.user
+
+# JustCode is a .NET coding add-in
+.JustCode
+
+# TeamCity is a build add-in
+_TeamCity*
+
+# DotCover is a Code Coverage Tool
+*.dotCover
+
+# AxoCover is a Code Coverage Tool
+.axoCover/*
+!.axoCover/settings.json
+
+# Visual Studio code coverage results
+*.coverage
+*.coveragexml
+
+# NCrunch
+_NCrunch_*
+.*crunch*.local.xml
+nCrunchTemp_*
+
+# MightyMoose
+*.mm.*
+AutoTest.Net/
+
+# Web workbench (sass)
+.sass-cache/
+
+# Installshield output folder
+[Ee]xpress/
+
+# DocProject is a documentation generator add-in
+DocProject/buildhelp/
+DocProject/Help/*.HxT
+DocProject/Help/*.HxC
+DocProject/Help/*.hhc
+DocProject/Help/*.hhk
+DocProject/Help/*.hhp
+DocProject/Help/Html2
+DocProject/Help/html
+
+# Click-Once directory
+publish/
+
+# Publish Web Output
+*.[Pp]ublish.xml
+*.azurePubxml
+# Note: Comment the next line if you want to checkin your web deploy settings,
+# but database connection strings (with potential passwords) will be unencrypted
+*.pubxml
+*.publishproj
+
+# Microsoft Azure Web App publish settings. Comment the next line if you want to
+# checkin your Azure Web App publish settings, but sensitive information contained
+# in these scripts will be unencrypted
+PublishScripts/
+
+# NuGet Packages
+*.nupkg
+# The packages folder can be ignored because of Package Restore
+**/[Pp]ackages/*
+# except build/, which is used as an MSBuild target.
+!**/[Pp]ackages/build/
+# Uncomment if necessary however generally it will be regenerated when needed
+#!**/[Pp]ackages/repositories.config
+# NuGet v3's project.json files produces more ignorable files
+*.nuget.props
+*.nuget.targets
+
+# Microsoft Azure Build Output
+csx/
+*.build.csdef
+
+# Microsoft Azure Emulator
+ecf/
+rcf/
+
+# Windows Store app package directories and files
+AppPackages/
+BundleArtifacts/
+Package.StoreAssociation.xml
+_pkginfo.txt
+*.appx
+
+# Visual Studio cache files
+# files ending in .cache can be ignored
+*.[Cc]ache
+# but keep track of directories ending in .cache
+!?*.[Cc]ache/
+
+# Others
+ClientBin/
+~$*
+*~
+*.dbmdl
+*.dbproj.schemaview
+*.jfm
+*.pfx
+*.publishsettings
+orleans.codegen.cs
+
+# Including strong name files can present a security risk
+# (https://github.com/github/gitignore/pull/2483#issue-259490424)
+#*.snk
+
+# Since there are multiple workflows, uncomment next line to ignore bower_components
+# (https://github.com/github/gitignore/pull/1529#issuecomment-104372622)
+#bower_components/
+
+# RIA/Silverlight projects
+Generated_Code/
+
+# Backup & report files from converting an old project file
+# to a newer Visual Studio version. Backup files are not needed,
+# because we have git ;-)
+_UpgradeReport_Files/
+Backup*/
+UpgradeLog*.XML
+UpgradeLog*.htm
+ServiceFabricBackup/
+*.rptproj.bak
+
+# SQL Server files
+*.mdf
+*.ldf
+*.ndf
+
+# Business Intelligence projects
+*.rdl.data
+*.bim.layout
+*.bim_*.settings
+*.rptproj.rsuser
+*- Backup*.rdl
+
+# Microsoft Fakes
+FakesAssemblies/
+
+# GhostDoc plugin setting file
+*.GhostDoc.xml
+
+# Node.js Tools for Visual Studio
+.ntvs_analysis.dat
+node_modules/
+
+# Visual Studio 6 build log
+*.plg
+
+# Visual Studio 6 workspace options file
+*.opt
+
+# Visual Studio 6 auto-generated workspace file (contains which files were open etc.)
+*.vbw
+
+# Visual Studio LightSwitch build output
+**/*.HTMLClient/GeneratedArtifacts
+**/*.DesktopClient/GeneratedArtifacts
+**/*.DesktopClient/ModelManifest.xml
+**/*.Server/GeneratedArtifacts
+**/*.Server/ModelManifest.xml
+_Pvt_Extensions
+
+# Paket dependency manager
+.paket/paket.exe
+paket-files/
+
+# FAKE - F# Make
+.fake/
+
+# JetBrains Rider
+.idea/
+*.sln.iml
+
+# CodeRush personal settings
+.cr/personal
+
+# Python Tools for Visual Studio (PTVS)
+__pycache__/
+*.pyc
+
+# Cake - Uncomment if you are using it
+# tools/**
+# !tools/packages.config
+
+# Tabs Studio
+*.tss
+
+# Telerik's JustMock configuration file
+*.jmconfig
+
+# BizTalk build output
+*.btp.cs
+*.btm.cs
+*.odx.cs
+*.xsd.cs
+
+# OpenCover UI analysis results
+OpenCover/
+
+# Azure Stream Analytics local run output
+ASALocalRun/
+
+# MSBuild Binary and Structured Log
+*.binlog
+
+# NVidia Nsight GPU debugger configuration file
+*.nvuser
+
+# MFractors (Xamarin productivity tool) working folder
+.mfractor/
+
+# Local History for Visual Studio
+.localhistory/
+
+# BeatPulse healthcheck temp database
+healthchecksdb

CitiLogReportDemo/CitiLogTCPClient.sln

@@ -0,0 +1,40 @@
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio 15
+VisualStudioVersion = 15.0.28307.1267
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "CitiLogReportDemo", "CitiLogTCPClient\CitiLogReportDemo.csproj", "{53DC86AA-6DC1-4CB1-8ADD-4C5E1119D45E}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Any CPU = Debug|Any CPU
+		Debug|x64 = Debug|x64
+		Release|Any CPU = Release|Any CPU
+		Release|x64 = Release|x64
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{53DC86AA-6DC1-4CB1-8ADD-4C5E1119D45E}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{53DC86AA-6DC1-4CB1-8ADD-4C5E1119D45E}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{53DC86AA-6DC1-4CB1-8ADD-4C5E1119D45E}.Debug|x64.ActiveCfg = Debug|x64
+		{53DC86AA-6DC1-4CB1-8ADD-4C5E1119D45E}.Debug|x64.Build.0 = Debug|x64
+		{53DC86AA-6DC1-4CB1-8ADD-4C5E1119D45E}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{53DC86AA-6DC1-4CB1-8ADD-4C5E1119D45E}.Release|Any CPU.Build.0 = Release|Any CPU
+		{53DC86AA-6DC1-4CB1-8ADD-4C5E1119D45E}.Release|x64.ActiveCfg = Release|x64
+		{53DC86AA-6DC1-4CB1-8ADD-4C5E1119D45E}.Release|x64.Build.0 = Release|x64
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+		SolutionGuid = {921042A7-3E31-45C6-AF94-90980B81AA42}
+	EndGlobalSection
+	GlobalSection(TeamFoundationVersionControl) = preSolution
+		SccNumberOfProjects = 2
+		SccEnterpriseProvider = {4CA58AB2-18FA-4F8D-95D4-32DDF27D184C}
+		SccTeamFoundationServer = http://192.168.7.217/cvi-code
+		SccLocalPath0 = .
+		SccProjectUniqueName1 = CitiLogTCPClient\\CitiLogReportDemo.csproj
+		SccProjectName1 = CitiLogTCPClient
+		SccLocalPath1 = CitiLogTCPClient
+	EndGlobalSection
+EndGlobal

CitiLogReportDemo/CitiLogTCPClient/App.config

@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="utf-8"?>
+<configuration>
+	<configSections>
+		<section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler, log4net" />
+	</configSections>
+	<log4net>
+		<appender name="RollingLogFileAppender" type="log4net.Appender.RollingFileAppender">
+			<file value="./Logs/CitiLogReport.log" />
+			<staticLogFileName value="true" />
+			<appendToFile value="true" />
+			<rollingStyle value="Size" />
+			<maximumFileSize value="1MB" />
+			<maxSizeRollBackups value="1000" />
+			<layout type="log4net.Layout.PatternLayout">
+				<conversionPattern value="%date %level [%thread] %logger - %message%newline" />
+			</layout>
+		</appender>
+		<root>
+			<level value="Info" />
+			<appender-ref ref="RollingLogFileAppender" />
+		</root>
+	</log4net>
+    <startup> 
+        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.6.1" />
+    </startup>
+  <runtime>
+    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
+      <dependentAssembly>
+        <assemblyIdentity name="System.Buffers" publicKeyToken="cc7b13ffcd2ddd51" culture="neutral" />
+        <bindingRedirect oldVersion="0.0.0.0-4.0.3.0" newVersion="4.0.3.0" />
+      </dependentAssembly>
+      <dependentAssembly>
+        <assemblyIdentity name="System.Memory" publicKeyToken="cc7b13ffcd2ddd51" culture="neutral" />
+        <bindingRedirect oldVersion="0.0.0.0-4.0.1.1" newVersion="4.0.1.1" />
+      </dependentAssembly>
+    </assemblyBinding>
+  </runtime>
+</configuration>

CitiLogReportDemo/CitiLogTCPClient/CitiLogReportDemo.Designer.cs

@@ -0,0 +1,361 @@
+namespace CitiLogReportDemo
+{
+    partial class CitiLogReportDemo
+    {
+        /// <summary>
+        /// Required designer variable.
+        /// </summary>
+        private System.ComponentModel.IContainer components = null;
+
+        /// <summary>
+        /// Clean up any resources being used.
+        /// </summary>
+        /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
+        protected override void Dispose(bool disposing)
+        {
+            if (disposing && (components != null))
+            {
+                components.Dispose();
+            }
+            base.Dispose(disposing);
+        }
+
+        #region Windows Form Designer generated code
+
+        /// <summary>
+        /// Required method for Designer support - do not modify
+        /// the contents of this method with the code editor.
+        /// </summary>
+        private void InitializeComponent()
+        {
+            this.groupBox2 = new System.Windows.Forms.GroupBox();
+            this.numericUpDownID = new System.Windows.Forms.NumericUpDown();
+            this.label1 = new System.Windows.Forms.Label();
+            this.textBoxTimeOut = new System.Windows.Forms.TextBox();
+            this.label8 = new System.Windows.Forms.Label();
+            this.textBoxPeriod = new System.Windows.Forms.TextBox();
+            this.label9 = new System.Windows.Forms.Label();
+            this.buttonConnect = new System.Windows.Forms.Button();
+            this.textBoxPort = new System.Windows.Forms.TextBox();
+            this.label7 = new System.Windows.Forms.Label();
+            this.textBoxServer = new System.Windows.Forms.TextBox();
+            this.label4 = new System.Windows.Forms.Label();
+            this.groupBox1 = new System.Windows.Forms.GroupBox();
+            this.textBoxDBPassowrd = new System.Windows.Forms.TextBox();
+            this.label3 = new System.Windows.Forms.Label();
+            this.textBoxDBUser = new System.Windows.Forms.TextBox();
+            this.label5 = new System.Windows.Forms.Label();
+            this.textBoxDBPort = new System.Windows.Forms.TextBox();
+            this.label6 = new System.Windows.Forms.Label();
+            this.textBoxDBServer = new System.Windows.Forms.TextBox();
+            this.label10 = new System.Windows.Forms.Label();
+            this.label2 = new System.Windows.Forms.Label();
+            this.textBoxDatabase = new System.Windows.Forms.TextBox();
+            this.label11 = new System.Windows.Forms.Label();
+            this.textBoxTable = new System.Windows.Forms.TextBox();
+            this.groupBox2.SuspendLayout();
+            ((System.ComponentModel.ISupportInitialize)(this.numericUpDownID)).BeginInit();
+            this.groupBox1.SuspendLayout();
+            this.SuspendLayout();
+            // 
+            // groupBox2
+            // 
+            this.groupBox2.Controls.Add(this.numericUpDownID);
+            this.groupBox2.Controls.Add(this.label1);
+            this.groupBox2.Controls.Add(this.textBoxTimeOut);
+            this.groupBox2.Controls.Add(this.label8);
+            this.groupBox2.Controls.Add(this.textBoxPeriod);
+            this.groupBox2.Controls.Add(this.label9);
+            this.groupBox2.Controls.Add(this.buttonConnect);
+            this.groupBox2.Controls.Add(this.textBoxPort);
+            this.groupBox2.Controls.Add(this.label7);
+            this.groupBox2.Controls.Add(this.textBoxServer);
+            this.groupBox2.Controls.Add(this.label4);
+            this.groupBox2.Location = new System.Drawing.Point(30, 108);
+            this.groupBox2.Name = "groupBox2";
+            this.groupBox2.Size = new System.Drawing.Size(581, 99);
+            this.groupBox2.TabIndex = 20;
+            this.groupBox2.TabStop = false;
+            this.groupBox2.Text = "Connection Group";
+            // 
+            // numericUpDownID
+            // 
+            this.numericUpDownID.Location = new System.Drawing.Point(473, 22);
+            this.numericUpDownID.Maximum = new decimal(new int[] {
+            100000,
+            0,
+            0,
+            0});
+            this.numericUpDownID.Minimum = new decimal(new int[] {
+            1,
+            0,
+            0,
+            0});
+            this.numericUpDownID.Name = "numericUpDownID";
+            this.numericUpDownID.Size = new System.Drawing.Size(92, 20);
+            this.numericUpDownID.TabIndex = 26;
+            this.numericUpDownID.Value = new decimal(new int[] {
+            1,
+            0,
+            0,
+            0});
+            // 
+            // label1
+            // 
+            this.label1.AutoSize = true;
+            this.label1.Location = new System.Drawing.Point(448, 26);
+            this.label1.Name = "label1";
+            this.label1.Size = new System.Drawing.Size(18, 13);
+            this.label1.TabIndex = 25;
+            this.label1.Text = "ID";
+            // 
+            // textBoxTimeOut
+            // 
+            this.textBoxTimeOut.Location = new System.Drawing.Point(317, 58);
+            this.textBoxTimeOut.Name = "textBoxTimeOut";
+            this.textBoxTimeOut.Size = new System.Drawing.Size(109, 20);
+            this.textBoxTimeOut.TabIndex = 24;
+            this.textBoxTimeOut.Text = "60";
+            // 
+            // label8
+            // 
+            this.label8.AutoSize = true;
+            this.label8.Location = new System.Drawing.Point(230, 61);
+            this.label8.Name = "label8";
+            this.label8.Size = new System.Drawing.Size(47, 13);
+            this.label8.TabIndex = 23;
+            this.label8.Text = "TimeOut";
+            // 
+            // textBoxPeriod
+            // 
+            this.textBoxPeriod.Location = new System.Drawing.Point(76, 58);
+            this.textBoxPeriod.Name = "textBoxPeriod";
+            this.textBoxPeriod.Size = new System.Drawing.Size(109, 20);
+            this.textBoxPeriod.TabIndex = 22;
+            this.textBoxPeriod.Text = "30";
+            // 
+            // label9
+            // 
+            this.label9.AutoSize = true;
+            this.label9.Location = new System.Drawing.Point(25, 61);
+            this.label9.Name = "label9";
+            this.label9.Size = new System.Drawing.Size(37, 13);
+            this.label9.TabIndex = 21;
+            this.label9.Text = "Period";
+            // 
+            // buttonConnect
+            // 
+            this.buttonConnect.Location = new System.Drawing.Point(467, 53);
+            this.buttonConnect.Name = "buttonConnect";
+            this.buttonConnect.Size = new System.Drawing.Size(98, 28);
+            this.buttonConnect.TabIndex = 19;
+            this.buttonConnect.Text = "Connect";
+            this.buttonConnect.UseVisualStyleBackColor = true;
+            this.buttonConnect.Click += new System.EventHandler(this.buttonConnect_Click);
+            // 
+            // textBoxPort
+            // 
+            this.textBoxPort.Location = new System.Drawing.Point(317, 23);
+            this.textBoxPort.Name = "textBoxPort";
+            this.textBoxPort.Size = new System.Drawing.Size(109, 20);
+            this.textBoxPort.TabIndex = 7;
+            this.textBoxPort.Text = "44000";
+            // 
+            // label7
+            // 
+            this.label7.AutoSize = true;
+            this.label7.Location = new System.Drawing.Point(230, 26);
+            this.label7.Name = "label7";
+            this.label7.Size = new System.Drawing.Size(60, 13);
+            this.label7.TabIndex = 6;
+            this.label7.Text = "Server Port";
+            // 
+            // textBoxServer
+            // 
+            this.textBoxServer.Location = new System.Drawing.Point(76, 23);
+            this.textBoxServer.Name = "textBoxServer";
+            this.textBoxServer.Size = new System.Drawing.Size(109, 20);
+            this.textBoxServer.TabIndex = 5;
+            this.textBoxServer.Text = "172.1.13.228";
+            // 
+            // label4
+            // 
+            this.label4.AutoSize = true;
+            this.label4.Location = new System.Drawing.Point(25, 26);
+            this.label4.Name = "label4";
+            this.label4.Size = new System.Drawing.Size(51, 13);
+            this.label4.TabIndex = 4;
+            this.label4.Text = "Server IP";
+            // 
+            // groupBox1
+            // 
+            this.groupBox1.Controls.Add(this.textBoxTable);
+            this.groupBox1.Controls.Add(this.label11);
+            this.groupBox1.Controls.Add(this.textBoxDatabase);
+            this.groupBox1.Controls.Add(this.label2);
+            this.groupBox1.Controls.Add(this.textBoxDBPassowrd);
+            this.groupBox1.Controls.Add(this.label3);
+            this.groupBox1.Controls.Add(this.textBoxDBUser);
+            this.groupBox1.Controls.Add(this.label5);
+            this.groupBox1.Controls.Add(this.textBoxDBPort);
+            this.groupBox1.Controls.Add(this.label6);
+            this.groupBox1.Controls.Add(this.textBoxDBServer);
+            this.groupBox1.Controls.Add(this.label10);
+            this.groupBox1.Location = new System.Drawing.Point(30, 3);
+            this.groupBox1.Name = "groupBox1";
+            this.groupBox1.Size = new System.Drawing.Size(581, 99);
+            this.groupBox1.TabIndex = 27;
+            this.groupBox1.TabStop = false;
+            this.groupBox1.Text = "Database Group";
+            // 
+            // textBoxDBPassowrd
+            // 
+            this.textBoxDBPassowrd.Location = new System.Drawing.Point(264, 55);
+            this.textBoxDBPassowrd.Name = "textBoxDBPassowrd";
+            this.textBoxDBPassowrd.Size = new System.Drawing.Size(111, 20);
+            this.textBoxDBPassowrd.TabIndex = 24;
+            this.textBoxDBPassowrd.Text = "123";
+            this.textBoxDBPassowrd.UseSystemPasswordChar = true;
+            // 
+            // label3
+            // 
+            this.label3.AutoSize = true;
+            this.label3.Location = new System.Drawing.Point(205, 58);
+            this.label3.Name = "label3";
+            this.label3.Size = new System.Drawing.Size(53, 13);
+            this.label3.TabIndex = 23;
+            this.label3.Text = "Password";
+            // 
+            // textBoxDBUser
+            // 
+            this.textBoxDBUser.Location = new System.Drawing.Point(266, 23);
+            this.textBoxDBUser.Name = "textBoxDBUser";
+            this.textBoxDBUser.Size = new System.Drawing.Size(109, 20);
+            this.textBoxDBUser.TabIndex = 22;
+            this.textBoxDBUser.Text = "root";
+            // 
+            // label5
+            // 
+            this.label5.AutoSize = true;
+            this.label5.Location = new System.Drawing.Point(205, 26);
+            this.label5.Name = "label5";
+            this.label5.Size = new System.Drawing.Size(29, 13);
+            this.label5.TabIndex = 21;
+            this.label5.Text = "User";
+            // 
+            // textBoxDBPort
+            // 
+            this.textBoxDBPort.Location = new System.Drawing.Point(76, 55);
+            this.textBoxDBPort.Name = "textBoxDBPort";
+            this.textBoxDBPort.Size = new System.Drawing.Size(109, 20);
+            this.textBoxDBPort.TabIndex = 7;
+            this.textBoxDBPort.Text = "3306";
+            // 
+            // label6
+            // 
+            this.label6.AutoSize = true;
+            this.label6.Location = new System.Drawing.Point(25, 58);
+            this.label6.Name = "label6";
+            this.label6.Size = new System.Drawing.Size(26, 13);
+            this.label6.TabIndex = 6;
+            this.label6.Text = "Port";
+            // 
+            // textBoxDBServer
+            // 
+            this.textBoxDBServer.Location = new System.Drawing.Point(76, 23);
+            this.textBoxDBServer.Name = "textBoxDBServer";
+            this.textBoxDBServer.Size = new System.Drawing.Size(109, 20);
+            this.textBoxDBServer.TabIndex = 5;
+            this.textBoxDBServer.Text = "localhost";
+            // 
+            // label10
+            // 
+            this.label10.AutoSize = true;
+            this.label10.Location = new System.Drawing.Point(25, 26);
+            this.label10.Name = "label10";
+            this.label10.Size = new System.Drawing.Size(51, 13);
+            this.label10.TabIndex = 4;
+            this.label10.Text = "Server IP";
+            // 
+            // label2
+            // 
+            this.label2.AutoSize = true;
+            this.label2.Location = new System.Drawing.Point(403, 26);
+            this.label2.Name = "label2";
+            this.label2.Size = new System.Drawing.Size(53, 13);
+            this.label2.TabIndex = 25;
+            this.label2.Text = "Database";
+            // 
+            // textBoxDatabase
+            // 
+            this.textBoxDatabase.Location = new System.Drawing.Point(456, 23);
+            this.textBoxDatabase.Name = "textBoxDatabase";
+            this.textBoxDatabase.Size = new System.Drawing.Size(109, 20);
+            this.textBoxDatabase.TabIndex = 26;
+            this.textBoxDatabase.Text = "trafficbase";
+            // 
+            // label11
+            // 
+            this.label11.AutoSize = true;
+            this.label11.Location = new System.Drawing.Point(403, 58);
+            this.label11.Name = "label11";
+            this.label11.Size = new System.Drawing.Size(34, 13);
+            this.label11.TabIndex = 27;
+            this.label11.Text = "Table";
+            // 
+            // textBoxTable
+            // 
+            this.textBoxTable.Location = new System.Drawing.Point(456, 55);
+            this.textBoxTable.Name = "textBoxTable";
+            this.textBoxTable.Size = new System.Drawing.Size(109, 20);
+            this.textBoxTable.TabIndex = 28;
+            this.textBoxTable.Text = "location";
+            // 
+            // CitiLogReportDemo
+            // 
+            this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F);
+            this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
+            this.ClientSize = new System.Drawing.Size(636, 219);
+            this.Controls.Add(this.groupBox1);
+            this.Controls.Add(this.groupBox2);
+            this.Name = "CitiLogReportDemo";
+            this.Text = "CitiLog Report Demo";
+            this.FormClosing += new System.Windows.Forms.FormClosingEventHandler(this.CitiLogReportDemo_FormClosing);
+            this.groupBox2.ResumeLayout(false);
+            this.groupBox2.PerformLayout();
+            ((System.ComponentModel.ISupportInitialize)(this.numericUpDownID)).EndInit();
+            this.groupBox1.ResumeLayout(false);
+            this.groupBox1.PerformLayout();
+            this.ResumeLayout(false);
+
+        }
+
+        #endregion
+        private System.Windows.Forms.GroupBox groupBox2;
+        private System.Windows.Forms.Button buttonConnect;
+        private System.Windows.Forms.TextBox textBoxPort;
+        private System.Windows.Forms.Label label7;
+        private System.Windows.Forms.TextBox textBoxServer;
+        private System.Windows.Forms.Label label4;
+        private System.Windows.Forms.TextBox textBoxTimeOut;
+        private System.Windows.Forms.Label label8;
+        private System.Windows.Forms.TextBox textBoxPeriod;
+        private System.Windows.Forms.Label label9;
+        private System.Windows.Forms.NumericUpDown numericUpDownID;
+        private System.Windows.Forms.Label label1;
+        private System.Windows.Forms.GroupBox groupBox1;
+        private System.Windows.Forms.TextBox textBoxDBPassowrd;
+        private System.Windows.Forms.Label label3;
+        private System.Windows.Forms.TextBox textBoxDBUser;
+        private System.Windows.Forms.Label label5;
+        private System.Windows.Forms.TextBox textBoxDBPort;
+        private System.Windows.Forms.Label label6;
+        private System.Windows.Forms.TextBox textBoxDBServer;
+        private System.Windows.Forms.Label label10;
+        private System.Windows.Forms.TextBox textBoxTable;
+        private System.Windows.Forms.Label label11;
+        private System.Windows.Forms.TextBox textBoxDatabase;
+        private System.Windows.Forms.Label label2;
+    }
+}
+

CitiLogReportDemo/CitiLogTCPClient/CitiLogReportDemo.cs

@@ -0,0 +1,72 @@
+using System;
+using System.Windows.Forms;
+using log4net;
+using CitiLogReport;
+
+namespace CitiLogReportDemo
+{
+    public partial class CitiLogReportDemo : Form
+    {
+        public static readonly ILog Logger = LogManager.GetLogger("CitiLogReportDemo");
+        private bool connected;
+
+        private CitiLogReport.CitiLogReport citiLogReport;
+        public CitiLogReportDemo()
+        {
+            Logger.Info(string.Format("CitiLogReportDemo: Start..."));
+            InitializeComponent();
+            DatabaseInfo databaseInfo = new DatabaseInfo()
+            {                
+                IP  = textBoxDBServer.Text,
+                Port = int.Parse(textBoxDBPort.Text),
+                User = textBoxDBUser.Text,
+                Password = textBoxDBPassowrd.Text,
+                Database = textBoxDatabase.Text,
+                LocationTable = textBoxTable.Text
+            };
+            citiLogReport = new CitiLogReport.CitiLogReport((int)numericUpDownID.Value, databaseInfo);
+        }
+
+        private void buttonConnect_Click(object sender, EventArgs e)
+        {
+            if (!connected)
+            {
+                int port = 44000;
+                int.TryParse(textBoxPort.Text, out port);
+                int interval = 30;
+                int.TryParse(textBoxPeriod.Text, out interval);
+
+                if (citiLogReport.ReadLocationTable())
+                {
+                    if (connected = citiLogReport.Start(textBoxServer.Text, port, interval))
+                    {
+                        buttonConnect.Text = "Disconnect";
+                    }
+                }
+            }
+            else
+            {
+                citiLogReport.Stop();
+                buttonConnect.Text = "Connect";
+                connected = false;
+            }
+        }
+
+        private void CitiLogReportDemo_FormClosing(object sender, FormClosingEventArgs e)
+        {
+            citiLogReport.Stop();
+        }
+    }
+
+    /// <summary>
+    /// Location information
+    /// </summary>
+    public class Location
+    {
+        public uint id { get; set; }
+
+        public string name { get; set; }
+
+        public string desc { get; set; }
+    }
+}

CitiLogReportDemo/CitiLogTCPClient/CitiLogReportDemo.csproj

@@ -0,0 +1,113 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProjectGuid>{53DC86AA-6DC1-4CB1-8ADD-4C5E1119D45E}</ProjectGuid>
+    <OutputType>WinExe</OutputType>
+    <RootNamespace>CitiLogReportDemo</RootNamespace>
+    <AssemblyName>CitiLogReportDemo</AssemblyName>
+    <TargetFrameworkVersion>v4.6.1</TargetFrameworkVersion>
+    <FileAlignment>512</FileAlignment>
+    <AutoGenerateBindingRedirects>true</AutoGenerateBindingRedirects>
+    <Deterministic>true</Deterministic>
+    <SccProjectName>SAK</SccProjectName>
+    <SccLocalPath>SAK</SccLocalPath>
+    <SccAuxPath>SAK</SccAuxPath>
+    <SccProvider>SAK</SccProvider>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <PropertyGroup>
+    <ApplicationManifest>app.manifest</ApplicationManifest>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Debug|x64'">
+    <DebugSymbols>true</DebugSymbols>
+    <OutputPath>bin\x64\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <DebugType>full</DebugType>
+    <PlatformTarget>x64</PlatformTarget>
+    <LangVersion>7.3</LangVersion>
+    <ErrorReport>prompt</ErrorReport>
+    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
+    <Prefer32Bit>true</Prefer32Bit>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Release|x64'">
+    <OutputPath>bin\x64\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <Optimize>true</Optimize>
+    <DebugType>pdbonly</DebugType>
+    <PlatformTarget>x64</PlatformTarget>
+    <LangVersion>7.3</LangVersion>
+    <ErrorReport>prompt</ErrorReport>
+    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
+    <Prefer32Bit>true</Prefer32Bit>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="CitiLogReport">
+      <HintPath>..\CitiLogReport\CitiLogReport.dll</HintPath>
+    </Reference>
+    <Reference Include="log4net">
+      <HintPath>..\..\cvs\DeviceSDKs\log4net\log4net.dll</HintPath>
+    </Reference>
+    <Reference Include="System" />
+    <Reference Include="Microsoft.CSharp" />
+    <Reference Include="System.Drawing" />
+    <Reference Include="System.Windows.Forms" />
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="CitiLogReportDemo.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="CitiLogReportDemo.Designer.cs">
+      <DependentUpon>CitiLogReportDemo.cs</DependentUpon>
+    </Compile>
+    <Compile Include="Program.cs" />
+    <Compile Include="Properties\AssemblyInfo.cs" />
+    <EmbeddedResource Include="Properties\Resources.resx">
+      <Generator>ResXFileCodeGenerator</Generator>
+      <LastGenOutput>Resources.Designer.cs</LastGenOutput>
+      <SubType>Designer</SubType>
+    </EmbeddedResource>
+    <Compile Include="Properties\Resources.Designer.cs">
+      <AutoGen>True</AutoGen>
+      <DependentUpon>Resources.resx</DependentUpon>
+      <DesignTime>True</DesignTime>
+    </Compile>
+    <EmbeddedResource Include="CitiLogReportDemo.resx">
+      <DependentUpon>CitiLogReportDemo.cs</DependentUpon>
+    </EmbeddedResource>
+    <None Include="app.manifest" />
+    <None Include="Properties\Settings.settings">
+      <Generator>SettingsSingleFileGenerator</Generator>
+      <LastGenOutput>Settings.Designer.cs</LastGenOutput>
+    </None>
+    <Compile Include="Properties\Settings.Designer.cs">
+      <AutoGen>True</AutoGen>
+      <DependentUpon>Settings.settings</DependentUpon>
+      <DesignTimeSharedInput>True</DesignTimeSharedInput>
+    </Compile>
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="App.config" />
+  </ItemGroup>
+  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+</Project>

CitiLogReportDemo/CitiLogTCPClient/CitiLogReportDemo.resx

@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>

CitiLogReportDemo/CitiLogTCPClient/Program.cs

@@ -0,0 +1,22 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Threading.Tasks;
+using System.Windows.Forms;
+
+namespace CitiLogReportDemo
+{
+    static class Program
+    {
+        /// <summary>
+        /// The main entry point for the application.
+        /// </summary>
+        [STAThread]
+        static void Main()
+        {
+            Application.EnableVisualStyles();
+            Application.SetCompatibleTextRenderingDefault(false);
+            Application.Run(new CitiLogReportDemo());
+        }
+    }
+}

CitiLogReportDemo/CitiLogTCPClient/Properties/AssemblyInfo.cs

@@ -0,0 +1,38 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("CitiLogTCPClient")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("CitiLogTCPClient")]
+[assembly: AssemblyCopyright("Copyright ©  2021")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components.  If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("53dc86aa-6dc1-4cb1-8add-4c5e1119d45e")]
+
+[assembly: log4net.Config.XmlConfigurator(Watch = true)]
+
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]

CitiLogReportDemo/CitiLogTCPClient/Properties/Resources.Designer.cs

@@ -0,0 +1,63 @@
+//------------------------------------------------------------------------------
+// <auto-generated>
+//     This code was generated by a tool.
+//     Runtime Version:4.0.30319.42000
+//
+//     Changes to this file may cause incorrect behavior and will be lost if
+//     the code is regenerated.
+// </auto-generated>
+//------------------------------------------------------------------------------
+
+namespace CitiLogReportDemo.Properties {
+    using System;
+    
+    
+    /// <summary>
+    ///   A strongly-typed resource class, for looking up localized strings, etc.
+    /// </summary>
+    // This class was auto-generated by the StronglyTypedResourceBuilder
+    // class via a tool like ResGen or Visual Studio.
+    // To add or remove a member, edit your .ResX file then rerun ResGen
+    // with the /str option, or rebuild your VS project.
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "15.0.0.0")]
+    [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
+    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
+    internal class Resources {
+        
+        private static global::System.Resources.ResourceManager resourceMan;
+        
+        private static global::System.Globalization.CultureInfo resourceCulture;
+        
+        [global::System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1811:AvoidUncalledPrivateCode")]
+        internal Resources() {
+        }
+        
+        /// <summary>
+        ///   Returns the cached ResourceManager instance used by this class.
+        /// </summary>
+        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
+        internal static global::System.Resources.ResourceManager ResourceManager {
+            get {
+                if (object.ReferenceEquals(resourceMan, null)) {
+                    global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("CitiLogReportDemo.Properties.Resources", typeof(Resources).Assembly);
+                    resourceMan = temp;
+                }
+                return resourceMan;
+            }
+        }
+        
+        /// <summary>
+        ///   Overrides the current thread's CurrentUICulture property for all
+        ///   resource lookups using this strongly typed resource class.
+        /// </summary>
+        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
+        internal static global::System.Globalization.CultureInfo Culture {
+            get {
+                return resourceCulture;
+            }
+            set {
+                resourceCulture = value;
+            }
+        }
+    }
+}

CitiLogReportDemo/CitiLogTCPClient/Properties/Resources.resx

@@ -0,0 +1,117 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>

CitiLogReportDemo/CitiLogTCPClient/Properties/Settings.Designer.cs

@@ -0,0 +1,26 @@
+//------------------------------------------------------------------------------
+// <auto-generated>
+//     This code was generated by a tool.
+//     Runtime Version:4.0.30319.42000
+//
+//     Changes to this file may cause incorrect behavior and will be lost if
+//     the code is regenerated.
+// </auto-generated>
+//------------------------------------------------------------------------------
+
+namespace CitiLogReportDemo.Properties {
+    
+    
+    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "15.9.0.0")]
+    internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase {
+        
+        private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings())));
+        
+        public static Settings Default {
+            get {
+                return defaultInstance;
+            }
+        }
+    }
+}

CitiLogReportDemo/CitiLogTCPClient/Properties/Settings.settings

@@ -0,0 +1,7 @@
+<?xml version='1.0' encoding='utf-8'?>
+<SettingsFile xmlns="http://schemas.microsoft.com/VisualStudio/2004/01/settings" CurrentProfile="(Default)">
+  <Profiles>
+    <Profile Name="(Default)" />
+  </Profiles>
+  <Settings />
+</SettingsFile>

CitiLogReportDemo/CitiLogTCPClient/app.manifest

@@ -0,0 +1,76 @@
+<?xml version="1.0" encoding="utf-8"?>
+<assembly manifestVersion="1.0" xmlns="urn:schemas-microsoft-com:asm.v1">
+  <assemblyIdentity version="1.0.0.0" name="MyApplication.app"/>
+  <trustInfo xmlns="urn:schemas-microsoft-com:asm.v2">
+    <security>
+      <requestedPrivileges xmlns="urn:schemas-microsoft-com:asm.v3">
+        <!-- UAC Manifest Options
+             If you want to change the Windows User Account Control level replace the 
+             requestedExecutionLevel node with one of the following.
+
+        <requestedExecutionLevel  level="asInvoker" uiAccess="false" />
+        <requestedExecutionLevel  level="requireAdministrator" uiAccess="false" />
+        <requestedExecutionLevel  level="highestAvailable" uiAccess="false" />
+
+            Specifying requestedExecutionLevel element will disable file and registry virtualization. 
+            Remove this element if your application requires this virtualization for backwards
+            compatibility.
+        -->
+		  <requestedExecutionLevel  level="requireAdministrator" uiAccess="false" />
+      </requestedPrivileges>
+    </security>
+  </trustInfo>
+
+  <compatibility xmlns="urn:schemas-microsoft-com:compatibility.v1">
+    <application>
+      <!-- A list of the Windows versions that this application has been tested on
+           and is designed to work with. Uncomment the appropriate elements
+           and Windows will automatically select the most compatible environment. -->
+
+      <!-- Windows Vista -->
+      <!--<supportedOS Id="{e2011457-1546-43c5-a5fe-008deee3d3f0}" />-->
+
+      <!-- Windows 7 -->
+      <!--<supportedOS Id="{35138b9a-5d96-4fbd-8e2d-a2440225f93a}" />-->
+
+      <!-- Windows 8 -->
+      <!--<supportedOS Id="{4a2f28e3-53b9-4441-ba9c-d69d4a4a6e38}" />-->
+
+      <!-- Windows 8.1 -->
+      <!--<supportedOS Id="{1f676c76-80e1-4239-95bb-83d0f6d0da78}" />-->
+
+      <!-- Windows 10 -->
+      <!--<supportedOS Id="{8e0f7a12-bfb3-4fe8-b9a5-48fd50a15a9a}" />-->
+
+    </application>
+  </compatibility>
+
+  <!-- Indicates that the application is DPI-aware and will not be automatically scaled by Windows at higher
+       DPIs. Windows Presentation Foundation (WPF) applications are automatically DPI-aware and do not need 
+       to opt in. Windows Forms applications targeting .NET Framework 4.6 that opt into this setting, should 
+       also set the 'EnableWindowsFormsHighDpiAutoResizing' setting to 'true' in their app.config. -->
+  <!--
+  <application xmlns="urn:schemas-microsoft-com:asm.v3">
+    <windowsSettings>
+      <dpiAware xmlns="http://schemas.microsoft.com/SMI/2005/WindowsSettings">true</dpiAware>
+    </windowsSettings>
+  </application>
+  -->
+
+  <!-- Enable themes for Windows common controls and dialogs (Windows XP and later) -->
+  <!--
+  <dependency>
+    <dependentAssembly>
+      <assemblyIdentity
+          type="win32"
+          name="Microsoft.Windows.Common-Controls"
+          version="6.0.0.0"
+          processorArchitecture="*"
+          publicKeyToken="6595b64144ccf1df"
+          language="*"
+        />
+    </dependentAssembly>
+  </dependency>
+  -->
+
+</assembly>

CitiLogReportDemo/CitiLogTCPClient/packages.config

@@ -0,0 +1,15 @@
+<?xml version="1.0" encoding="utf-8"?>
+<packages>
+  <package id="BouncyCastle" version="1.8.5" targetFramework="net461" />
+  <package id="Google.Protobuf" version="3.11.4" targetFramework="net461" />
+  <package id="K4os.Compression.LZ4" version="1.1.11" targetFramework="net461" />
+  <package id="K4os.Compression.LZ4.Streams" version="1.1.11" targetFramework="net461" />
+  <package id="K4os.Hash.xxHash" version="1.0.6" targetFramework="net461" />
+  <package id="MySql.Data" version="8.0.23" targetFramework="net461" />
+  <package id="Newtonsoft.Json" version="12.0.3" targetFramework="net461" />
+  <package id="SSH.NET" version="2020.0.0" targetFramework="net461" />
+  <package id="System.Buffers" version="4.5.1" targetFramework="net461" />
+  <package id="System.Memory" version="4.5.3" targetFramework="net461" />
+  <package id="System.Numerics.Vectors" version="4.4.0" targetFramework="net461" />
+  <package id="System.Runtime.CompilerServices.Unsafe" version="4.5.2" targetFramework="net461" />
+</packages>